|
| | FIAT 131
ABARTH FIBERGLASS BODY PARTS
I can deliver almost any 131 Abarth body part. In my rally car we use
"cheaper set" because of rally regulations in Finland. We aren't
allowed to use whole fiberglass kit. Check pictures at MY 131 RALLY
page.
NOTE, ALL PARTS ARE NEW.
- front
spoiler
700,- FIM
- engine cover (with scoop) 1800,- FIM
- trunk
cover
1500,- FIM
- roof
spoiler
250,- FIM
- front
mudguards
1300,- FIM/piece
- rear
mudguards
?,- FIM/piece
- rear bumper "hole"
cover 500 FIM
- NOTE, this have changed, ALMOST like abarth
light grille; for 4x5"lamps 500,- FIM
- sometimes available also special grille, like
Abarth NOW ONE NEW !! 900,- FIM
full set 8500,-FIM, includes mask (almost
like..)
also cheaper sets without full mudguard or cover, all that is
different to normal 131 is included
- from mudguards, fenders only all
four 1200,- FIM
- from engine cover, scoop
only
600,- FIM
- from trunk cover, spoiler
only
600,- FIM
- rear brake
inducts
500,- FIM/pair
full set 4400,-FIM, includes cheaper parts+ front and roof spoiler,
bumper cover, mask (almost like...)
scoop 600,- FIM
roof sp. 250,- FIM
fenders 1200,-FIM/four rear spoiler 600,-FIM
Special/Abarth grille and Supermirafiori grille
more pictures later...
- 1 USD = about 7,00 FIM
- 1 EURO = about 5,90 FIM
DELIVERY IS NOT INCLUDED IN PRICES ! !
TC ENGINE
- cast pistons, all types
- forget pistons, Asso etc.
- camshafts, many different, from 1200,- FIM/Pair
- stiff valve springs
- inlet manifolds, few different, for DCOE/swan
neck type, for DCNF..
- exhaust manifolds, many different, from 1700,-FIM
- bearings, normal and turbo type
- ask for anything!!
Asso 86mm forget piston set 
Aluminum adjustable cam pulleys
131 SUSPENSION
FRONT all that follows is used in my 131
too, look pics there.
- adjustable struts for Bilstein shockabsorbers
full with adjust "nuts", original Bilstein
product
- same as above but not original Bilstein
- track control arm, adjustable with uniball, fit
with original roll
bar
- Abarth style front arm, original roll bar must
be removed, uniball mounting to body, no
rubber
- uniball upper joints, steel or aluminum,
adjustable or not, many different, ask for prices
- Bilstein shocks, many different lenghts and
lbs. for ex.
300/70
- Springs, about 100 different, in kg:s and lbs:s,
lenghts 12-35cm,
80-1232lbs,
- pipe over rear shock, adjustable spring length,
fits Bilstein shocks, aluminum plates for spring, dont need welding, just
bolt in, 300mm
long
- Springs, about 100 different, in kg:s and lbs:s,
lenghts 12-35cm,
80-1232lbs,
- Bilstein shocks, two different type,
shorter that fits on original mountings, longer that need new upper mounting
to higher, longer is
harder=220/110lbs
- uniball links, watt-links for Volvo rear-axle,
Volvo limited slip, Volvo 5,38:1 and other
Watt link to Volvo rear axle, I have this on my car.
131 STEERING
- quicker steerings, fits original steering gear
- steering balljoints
124,125,131,132 CLUTCH FITS
AT LEAST THOSE
CLUTCH PLATES
- original style 200-228mm, many different,
Sachs,
AP...
- copper plates, three or four wing, spring
center or not, 200-215mm
CLUTCH PRESSURE PLATES
- 200-215mm dia. Sachs, AP, Valeo...
- 228mm dia. Can handle atleast 250hp, but heavy,
fits original spline, Sachs, AP...
- 200mm Sachs MF, in our car with 200mm three
wing copper plate handles 156hp at rear wheel with slicks on tarmac
OTHER STUFF
- Fiat 131 Abarth homologation papers for
g.4 52 pages,
copy
- Fiat 131 Racing homologation papers for g.1/2,
32 pages,
copy
- Fiat 131 Mirafiori 1600 homologation papers for
g.1 24 pages,
copy
- Fiat 131 Supermirafiori1600 homologation papers
for g.1/2 37 pages, copy
- Abarth logo stickers, few different, sometimes
I have them, sometimes not,
- Abarth key chains, maybe
available
- Abarth emblem to 131 rear pillar, original
style
- ABARTH/Rally sticker to trunk
lid
- Abarth steering wheel
center
- Abarth wheel center
caps
- if you have something on your mind...
Original style ABARTH/rally sticker. Originally in
Fiat 131 Abarth (atleast -78) trunk cover.
Many different homologation papers, this is Abarth
homologation.
Fiat 131 Abarth original rear pillar emblems, must
item to replica!
Fiat 131 Abarth horn button
DELIVERY IS NOT INCLUDED IN PRICES ! !
- 1 USD = about 7,00 FIM
- 1 EURO = about 5,90 FIM
AND LOTS MORE. ASK IF SOMETHING IS ON YOUR MIND!!
Dog-clutch gear boxes... intake manifolds... exhaust manifolds...
| |
|
